BOQ unit converter: from the units on the BOQ to the units you sell

Updated

Quote591 boxes850 m² ÷ 1.44 m² per box = 590.28, rounded up to 591Take the coverage per box from the box or your price list: it varies by maker and size.

Why the units never match

A BOQ is written by a quantity surveyor in the units of the drawing: square metres of floor, square metres of wall, metres of pipe, kilos of steel. Your price list is in the units you sell: boxes, blocks, pails, sheets, lengths, rolls, bags and tons. Every line where the two differ needs a conversion before it can be priced, and a wrong conversion is either money left on the table or an order you can’t fulfil.

In our own demo, 22 of the 47 lines of a real-format villa BOQ needed a conversion like the ones above (sample price list, sample BOQ). That is typical of finishing and MEP items; structural items such as cement or rebar by the ton usually don’t.

The conversions, one by one

Tiles: m² to boxes

Boxes = area ÷ coverage per box, rounded up. With 1.44 m² per box, 850 m² is 590.3, so you quote 591 boxes. The coverage is printed on the box and should be in your price list; it changes with the tile size, the thickness and the maker, so don’t reuse one figure for every tile.

Blocks: m² of wall to pieces

A 400×200 mm face covers 0.08 m², so one square metre of wall takes 12.5 blocks. Allowing for 10 mm mortar joints the face becomes 410×210 mm and the count drops to about 11.6 per m². Quoting 12.5 keeps the customer covered for joints you can’t see on a BOQ; either way, the number rests on an assumption, so say which one you used.

Paint: m² to pails

Litres = area × coats ÷ coverage per litre; pails = litres ÷ pail size. 3,800 m² at two coats and 10 m²/L is 760 litres, which is 42.2 pails of 18 L, so 43 pails. The coverage rate is the weak point: textured or porous surfaces take more, and the product data sheet is the reference.

Tile adhesive: m² to bags

Bags = area × consumption ÷ bag weight. At 4 kg/m² (a typical figure for a 6 mm notched trowel) 1,270 m² needs 5,080 kg, which is 254 bags of 20 kg. Bigger tiles and deeper notches use more.

Gypsum board: m² to sheets

A 1200×2400 mm sheet is 2.88 m². 1,100 m² is 381.9 sheets, so 382. Contractors often write “12 mm” for the standard 12.5 mm board; quote the board you actually sell and name it on the line.

Pipe, conduit, wire and membrane

Pipe and conduit go by the piece length (400 m of 6 m uPVC pipe is 66.7, so 67 lengths); wire by the roll (2,000 m is 20 rolls of 100 m); membrane by the roll area plus the overlap at the laps (310 m² with 10% overlap on 10 m² rolls is 34.1, so 35 rolls).

For rebar given in metres or kilos, use the rebar weight chart: it turns metres or bar counts into tons by diameter.

Round up, and show your assumptions

Always round up to whole selling units: nobody can deliver 590.3 boxes. Where the conversion depends on an assumption (blocks per m², paint coverage, adhesive consumption, overlap), write the assumption on the quotation line, for example “1,450 m² = 18,125 pcs (12.5 blocks per m²)”. The contractor can then check it in seconds, and a later dispute about quantities has an answer on paper.

Waste is a separate decision. A quantity surveyor usually measures net quantities, so the waste allowance for cutting and breakage belongs to the contractor. If you add it, show it as its own line or note rather than hiding it in the converted figure.

Questions

How many tiles are in a box of 60×60 tiles?

It depends on the manufacturer and the thickness. Four tiles per box (1.44 m²) is common for 60×60 porcelain, but always take the coverage printed on the box or the price list, not a rule of thumb.

How many blocks do I need per square metre of wall?

A block with a 400×200 mm face covers 0.08 m², which is 12.5 blocks per m² if you ignore the mortar joints. With 10 mm joints it is about 11.6 per m². Quoting 12.5 is the safer side for the customer.

Should I add waste to a BOQ quantity?

A BOQ quantity is usually measured net. Convert it and round up to whole units; if you add waste for cutting or breakage, show it as a separate line or note so the contractor can see and accept it.

How many sheets of 1200×2400 gypsum board per m²?

One 1200×2400 mm sheet covers 2.88 m², so 1 m² needs 0.347 sheets. 1,100 m² of ceiling is 381.9, so 382 sheets before any waste.

Price every BOQ line from your own price list, in under a minute

RateSent reads the BOQs and lists your customers send on WhatsApp or email, matches every line to your price list, converts the units and applies the customer’s prices. Your salesperson checks it and sends it. We test it free at your office with 20 of your real enquiries.