Rebar weight chart: kg per metre, per 12 m bar and bars per ton

Updated

Rebar weight chart

Calculated with d² ÷ 162 for 12 m bars, the standard length in the UAE. “T” is the usual site name for high-yield ribbed bar: T12 is a 12 mm bar.

Barkg per metrekg per 12 m barBars per tonMetres per ton
T80.3954.74210.92,531
T100.6177.41135.01,620
T120.88910.6793.81,125
T161.58018.9652.7633
T202.46929.6333.8405
T253.85846.3021.6259
T326.32175.8513.2158
T409.877118.528.4101

Calculator: metres, bars or kilos to tons

T12: 0.889 kg/m · 10.67 kg per 12 m bar

Quote1.600 tons= 1,600.0 kg = 150.0 bars of 12 m (150 whole bars)Calculated weight (d²/162). Actual weighbridge weight can differ by a few percent.

Where d² ÷ 162 comes from

A bar’s weight per metre is its cross-section times the density of steel, 7,850 kg/m³. For a diameter d in millimetres that is π/4 × d² × 7,850 ÷ 1,000,000 = 0.006165 × d² kg per metre. Because 1 ÷ 162 = 0.006173, dividing d² by 162 gives the same answer to within about 0.1%, and it is easy to do in your head: 16² = 256, and 256 ÷ 162 = 1.58 kg/m for a T16.

Using it on a quotation

Steel is usually sold by the ton, but BOQs give it in tons, kilos, metres or bar counts. Convert to tons with the calculator, round to the precision you invoice in, and state on the line whether the price applies to calculated or actual weight. When the BOQ says “12 mm” and your list says “T12 B500B 12 m”, write the bar you are quoting so there is no doubt about the grade.

The same conversion appears in a full BOQ alongside tiles, blocks and paint; the BOQ unit converter handles those, and the guide how to price a BOQ puts every step together.

Questions

What is the formula for rebar weight per metre?

Weight in kg per metre = d² ÷ 162, with d the bar diameter in millimetres. It comes from the steel density of 7,850 kg/m³: π/4 × d² × 7,850 ÷ 1,000,000 = 0.00617 × d², and 1/162 = 0.00617.

How many 12 m bars of T12 are in one ton?

A T12 bar weighs 0.889 kg/m, so a 12 m bar is 10.67 kg and one ton is 93.75 bars: about 94 bars.

Why does the weighbridge not match the calculated weight?

Ribbed bars are produced to a mass tolerance, not an exact diameter, so the actual weight can differ by a few percent. Many suppliers invoice on actual weight; say on the quotation which one you use.

Does the steel grade change the weight?

No. Weight per metre depends on the diameter only; grade B500B or Grade 460 bars of the same size weigh the same per metre.

Price every BOQ line from your own price list, in under a minute

RateSent reads the BOQs and lists your customers send on WhatsApp or email, matches every line to your price list, converts the units and applies the customer’s prices. Your salesperson checks it and sends it. We test it free at your office with 20 of your real enquiries.